Diamond-Crete Topcoat

 

  • Unlimited moisture tolerance

  • Anti-Microbial® additive

  • Water-based formula; no VOCs

  • Low-odor installation

  • Excellent impact resistance

  • Excellent chemical resistance

  • Slip resistant

  • Qualified LEED® product

  • Meets USDA and FDA standards

APPLICATION: 

 

  • Production

  • Vivariums

  • Food Procession

  • Packaging

  • Animal Care

  • Beverage Process

TYPICAL PROPERTIES:

 

Compressive Strength (ASTM C-579)..........10,000 psi

Tensile Strength (ASTM C-307)......................1,000 psi

Flexural Strength (ASTM C-580).....................2,900 psi

Hardness (Shore D) (ASTM D-2240)...................80–84

Bond Strength (ASTM D-4541)..........................400 psi

Impact Resistance (ASTM D-4226).............>180 lbs/in

Abrasion Resistance (ASTM D-4060, CS-17) .025 gm*

Flexural Mod of Elasticity (ASTM C-580).2.6x10^6 psi 

Flammability (ASTM D-635)................................Class I

Coefficient of Expansion (ASTM C-531)....1.1–105 in/in

Water Absorption (ASTM C-413).........................0.48%

VOC Content.........................................................0 g/L

Cure Rate for Foot Traffic at 70° F.........................6 hrs

Cure Rate for Foot Traffic at 50° F.......................10 hrs

 

*Texture specific. Lower number represents greater abrasion resistance. 


The data shown above reflect typical results based on laboratory testing under controlled conditions. Reasonable variations from the data shown above may result. 

 

 

 

CHEMICAL RESISTANCE: 


See Chemical Resistance Guide for all DiamondStone products. 

CLEANING AND MAINTENANCE: 

Refer to DiamondStone cleaning and maintenance instructions.

 

SHELF LIFE: 3 months at 77 F

PRECAUTIONS: 

 

Always use protective clothing, gloves and goggles consistent with OSHA regulations during use. Avoid eye and skin contact. Do not ingest or inhale. Refer to Material Safety Data Sheet for detailed safety precautions. 

DESCRIPTION: 

DIAMOND-CRETE TOPCOAT is a three-compo-nent urethane cement coating for use with Diamond-Crete flooring products. Diamond-Crete Topcoat is manufactured with the same technology as the base urethane cement floor to provide consistent urethane cement performance throughout the floor.  Anti-Microbial® is integrated throughout the entire system to inhibit the growth of micro -organisms, such as bacteria and bacterial odors. This additive employs ionic silver, a natural antimicrobial agent that continuously migrates to the wear surface, ensuring permanency of the biocidal, even in the event of excessive wear. Diamond-Crete Topcoat is formulated with HDI technology, offering excellent UV resistance, increased chemical resistance and increased cleanability, while providing an aesthetically pleasing finish.

SURFACE PREPARATION: 

 

Apply only to clean and sound concrete substrates that are free of all coatings, sealers, curing compounds, oils, greases or any other contaminants. New concrete should be cured a minimum of 7 days. Concrete that has been contaminated with chemicals or other foreign matter must be neutralized or removed. Remove any laitance or weak surface layers. Concrete should have a minimum surface tensile strength of 300 psi. Prepare surface by mechanical means to achieve a profile equal to industry standards. All surface irregularities, cracks, expansion joints and control joints should be properly addressed prior to application. Outgassing may occur due to the porosity of some concrete surfaces. Refer to DiamondStone® Surface Preparation Guidelines for more details. 
 

 

WARRANTY INFORMATION: 


DiamondStone LLC warrants this product for 5 years from date of purchase.  Terms of DiamondStone limited warranty apply.

LIMITATIONS: 

 

Do not apply when concrete temperatures are less than 35° F or greater than 85° F. (Material cures slower at cooler temperatures, and working time will be substantially reduced at higher temperatures.) All components should be stored in a dry place at temperatures between 35° F and 85° F. Do not thin with solvents. Confirm product performance in specific chemical environment prior to use. Substrate temperature must be at least 5° F above the dew point. Actual color may vary slightly upon application. Product will amber from UV exposure, including UV exposure from facility lighting, unless topcoated with Diamond-Crete Topcoat or broadcast with quartz and topcoated with Polyaspartic Urethane. When installing Diamond-Crete BG without a broadcast of quartz, Diamond-Prime® should be used to minimize outgassing of the concrete

 

 

  • Bio-Tech

  • Pharmaceutical

  • Comm. Kitchens

  • Restaurants

  • Pulp/Paper Mill

  • Waste Water Facility

  • Freezer/Cooler

Toll Free: 888-817-8663

info@diamondstoneproducts.com

 

©2017 DiamondStone, LLC. All Rights Reserved.