Eco-Top ESD®

 

DESCRIPTION: 

 

ECO-TOP ESD is a two-component polyester/aliphatic polyurethane ESD flooring system designed for interior or exterior use that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility and UV stability.

BENEFITS:

  • Excellent chemical resistance

  • Excellent UV resistance

  • Excellent abrasion resistance

  • Excellent self-leveling properties

  • Beautiful, medium-gloss surface

  • Increased light reflection

  • Resists many acids and solvents

  • Optional slip resistant additive

  • 10-year limited warranty

  • Particulate technology

  • Better durability than Epoxy ESD

  • Qualified LEED® product

 

ELECTRICAL RESISTANCE: 
 

Electrical characteristics point to point and surface to ground @100 volts.

 


Static Dissipative range = 1x106 to 1x109
Walking Body Voltages @20%–30% RH


Tested in accordance with the EOS/ESD Association 7.1 Standard Characterization of Floor Materials. The electrical properties can be formulated to customer custom electrical requirements upon request.


CHEMICAL RESISTANCE: 

See Chemical Resistance Guide for all DiamondStone products. 


 

RECOMMENDED USES: 

 

EcoTop ESD is recommended anywhere Electro-static Dis sipative properties are required in an attractive floor finish.  Applications include: warehouses, computer rooms, laboratories, aircraft hangers, indoor or outdoor service and chemical exposure.

LIMITATIONS: 

 

Do not apply when concrete temperatures are less than 50º F or greater than 95º F. (Material cures slower at cooler temperatures, and working time will be substantially reduced at higher temperatures.) All components should be stored in a dry place at temperatures between 65º F and 85º F. Confirm product performance in specific chemical environment prior to use. Substrate temperature must be at least 5º F above the dew point. 

TYPICAL PROPERTIES: 
 

Compressive Strength (ASTM C-579)..........12,900 psi

Tensile Strength (ASTM C-307)......................5,300 psi

Flexural Strength (ASTM C-580).....................5,351 psi

Hardness (Shore D) (ASTM D-2240)...................70–75

Bond Strength (ASTM D-4541)..........................300 psi

Abrasion Resistance (ASTM D-4060)..........35 mg/loss

Volume Solids.........................................................63%

Gloss Rating..............................................................90

Slip Coefficient (ASTM D-2047).........................passes

VOC...............................................................100 gm/ltr

Pot Life at 77° F.................................................30 mins

Foot Traffic at 77° F.............................................12 hrs

Full Service at 77° F ............................................24 hrs

 

The data shown above reflect typical results based on laboratory testing under controlled conditions. Reasonable variations from the data shown above may result.

 

 

SHELF LIFE: 3 months at 77° F

CLEANING AND MAINTENANCE: 

 

Install entrance matting at all room entry doors to prevent debris from being tracked onto the floor. Never apply wax to static-dissipative or conductive epoxy flooring! Sweep or dry-mop daily with an untreated dust mop. Damp-mop as needed. For normal dirt, grime and scuff marks, apply a neutral pH cleaner with a mop and then scrub with a low-speed “swing” buffer and a white buffer pad. Wipe up the soiled solution with a damp mop. Damp-mop again with clean solution, and allow the floor to dry completely. To remove more difficult marks, follow the same procedure using a tan buffer pad. Never use abrasive pads, brushes or stripping pads on a conductive epoxy floor. They will damage the surface gloss of the floor. Use only white or tan buffer pads in accordance with DiamondStone maintenance instructions. 

 

WARRANTY INFORMATION: 


DiamondStone, LLC warrants its products to be free from defects in material and workmanship. DiamondStone, LLC’s sole obligation and Buyer’s exclusive remedy in connection with the products shall be limited, at DiamondStone, LLC’s option, to either replacement of products not conforming to this warranty or credit to Buyer’s account in the invoiced amount of the nonconforming products. Any claim under this warranty must be made by Buyer to DiamondStone, LLC in writing within five (5) days of Buyer’s discovery of the claimed defect, but in no event later than the expiration of the applicable shelf life, or one (1) year from the delivery date, whichever is earlier. Buyer’s failure to notify DiamondStone, LLC of such nonconformance as required herein shall bar Buyer from recovery under this warranty.

This Limited Warranty is exclusive and in lieu of all other warranties of any kind or nature whatsoever. DiamondStone, LLC makes no other warranties concerning this product. No other warranties, whether expressed, implied or statutory, shall apply. All other warranties, including, but not limited to, implied warranties of good performance, merchantability and fitness for particular purpose are hereby excluded and disclaimed. In no event shall DiamondStone, LLC be liable for consequential or incidental damages.

Any recommendation or suggestion relating to the use of the products made by DiamondStone, LLC, whether in its technical literature, in response to specific inquiry, or otherwise, is based on data believed to be reliable; however, the products and information are intended for use by Buyers having requisite skill and know-how in the industry, and therefore it is for the Buyer to satisfy itself of the suitability of the products for its own particular use, and it shall be deemed that Buyer has done so, at its sole discretion and risk. Variation in environment, changes in procedures of use, or extrapolation of data may cause unsatisfactory results. DiamondStone, LLC cannot guarantee that color will conform to sample, if provided.

Toll Free: 888-817-8663

info@diamondstoneproducts.com

 

©2017 DiamondStone, LLC. All Rights Reserved.